loading

If you smell gas, shut off the main valve and call us from outside.View Safety Rules

5 Things to Check Before Underfloor Heating

Underfloor heating installation process

As winter approaches, more people start looking into underfloor heating because their floors feel cold or because there are big temperature differences between rooms. But when you actually look into it, it gets confusing because the hot water method, electric method, and whether you need to replace your boiler all get mixed together.

In this post, we'll break down the options for homeowners and residents planning underfloor heating. We'll compare each method and let you know which situation it suits best. We'll walk through everything you need to check before starting, from insulation and piping to choosing a contractor and figuring out the costs.

Understanding the Basic Structure of Underfloor Heating

Underfloor heating works by laying a layer beneath the floor to supply heat, and that heat then spreads throughout the room via the floor finish. You must lay down insulation first so the heat doesn't escape downwards, which helps keep the warmth going longer with the same fuel. When checking the existing floor structure before installation, it's smart to first see if you need to remove the current flooring or if there's enough room to install it as an overlay.

Comparing Hot Water vs. Electric Heating Methods

Underfloor heating generally falls into two categories: one that circulates hot water, and one that uses electric film or heating wires. Here’s a breakdown of the differences between the two methods.

CategoryHot Water MethodElectric Method
Heat SourceHot water heated by a boilerElectric film or heating wires
Best ForHomes needing constant heating throughoutSpecific rooms or when an overlay is needed
Installation TimeCan be longer due to piping workRelatively quick
Things to NoteCheck if it can connect to your current boilerCheck electricity usage and billing structure

Steam vs. Water Heater: Which System is Right for You?

If you go with a hot water system, you also need to decide on the heat source, which is the boiler. Dry hot water boilers often come with configurations that minimize the required installation space and piping, making them a good option if you have a small area or can't afford to tear up much of your floor. On the other hand, standard hot water boilers are usually easier to connect to existing plumbing.

The best choice really depends on the current condition of your boiler and the specifics of your plumbing setup.

If your current unit is old, it might be more cost-effective to consider replacing the boiler at the same time you install the underfloor heating.

When You Should Consider Replacing Your Boiler

If you're installing new underfloor heating and your current boiler is old or breaks down often, planning a boiler replacement alongside the heating installation can save you from doing multiple jobs. Since you're already opening up your floor, taking a moment to check the condition of the pipes can prevent you from having to dig up the floor again later.

  • If your boiler has been in use for many years and has a history of frequent repairs.
  • If parts of your hot water piping are buried under the floor, making it hard to check for leaks.
  • If you need to match the capacity of your underfloor heating with your hot water supply needs.

How to Choose a Reliable Underfloor Heating Installer

When picking a contractor, don't just look at the price. See if they start by asking about your specific site conditions. A trustworthy company will visit the site and explain the installation sequence after reviewing your floor structure, existing finishes, and insulation plans, rather than just giving you a quote on the spot.

  1. If they provide detailed explanations regarding the insulation installation order and pipe spacing.
  2. If they confirm how the new system will connect with your existing boiler.
  3. If they give you instructions on how to control the temperature and perform post-installation checks.
  4. If they put any warranty or defect response procedures in writing.

What Affect the Cost of Underfloor Heating Installation?

The final price tag can swing wildly depending on the installation method, the size of your space, whether or not you need to tear up your existing floor, the total length of the piping, and if you need to replace your boiler. The biggest factor, hands down, is whether you have to rip up the current flooring. Homes where we can just do a top-up installation versus those that require a full tear-out have totally different scopes of work, meaning even if the square footage is the same, the quotes will vary.

When you get estimates, make sure to scrutinize how the costs are broken down for demolition, insulation, piping, and the boiler itself.

Frequently Asked Questions

How Should I Go About Finding a Reputable Underfloor Heating Contractor?

It’s smart to check if the company provides detailed explanations of their local project history and can walk you through the site specifics. You should also get quotes from several different companies under the exact same conditions so you can compare apples to apples. If a contractor can't clearly explain their insulation and piping plan, you might want to look elsewhere.

Roughly How Much Does Underfloor Heating Installation Cost?

The exact price depends on the area, whether you need demolition, the piping length, and if the boiler needs swapping out. To even start guessing the cost, you need to review the estimate to see if it breaks down costs by item.

Can I Install Underfloor Heating Without Replacing My Existing Boiler?

Whether this is possible depends entirely on the capacity and connection type of your current boiler. It’s safest to have a professional check the condition of your boiler before starting the installation so you can decide together if a replacement is necessary.

Before you commit to the underfloor heating project, take some time to document your home's floor structure and the current state of your boiler. Once you have that information, take it to two or three different contractors for site consultations under the same terms. This will let you compare the methods and costs much more clearly.