loading

If you smell gas, shut off the main valve and call us from outside.View Safety Rules

Choosing the Right Floor Heating System for Your Home

Underfloor heating system

When you feel like your floors are cold heading into winter, you might immediately start wondering if you need to replace your boiler. Whether you live in an apartment or a house, underfloor heating is a system you install for the long haul, so making the right choice at the beginning is crucial.

In this post, I've broken down the steps you should take when choosing underfloor heating. You'll follow a flow: first, check your current heating situation, then compare the different types of underfloor heating, and finally, decide on boiler replacement or installation methods.

Step 1: First, Figure Out Why Your Heating Isn't Warm

If you just feel like the underfloor heating is cold, jumping straight to replacing your equipment might just cost you money without fixing the actual problem. Take a look at these points first.

  • When you first turn the system on, it takes time for the heat to travel through the pipes and reach the floor. You can't assume it's broken just because it feels cold to the touch.
  • If your floor covering is thick, it slows down heat transfer. The perceived warmth can change depending on whether you have laminate or hardwood flooring.
  • If your house lacks insulation—especially around window frames and under the floor—the warmth won't last long, even if the heating is on.
  • Turning up the thermostat doesn't mean the room will instantly heat up. You need to check what the numbers on your thermostat actually mean.

Step 2: Comparing Different Types of Underfloor Heating

Underfloor heating generally falls into categories based on where it pulls its heat source from. The main methods include hot water circulation systems, electric film systems that lay a heating film under the floor, and systems like electric radiant flooring that add heating capabilities directly to the flooring itself.

MethodKey FeaturesBest Suited For
Hot Water Piping SystemCirculates hot water from the boiler through pipes, distributing heat evenly over a large area.Houses with existing boilers, new construction apartments
Electric Film SystemDelivers warmth by laying a thin heating film beneath the floor. No pipe installation is required.Sheds, containers, office break rooms where piping is difficult
Electric Radiant FlooringAdds a heating structure beneath the flooring, allowing it to be installed as a top layer over existing floors.School classrooms, renovations where removing the existing floor isn't feasible

Each method has different requirements regarding piping, installation time, and the variety of flooring you can choose. You should look at your home's structure and current floor condition before making a decision.

3. What to Check When Considering a Dry Electric Boiler

Some people look into dry electric boilers as an alternative to their current gas boiler. This is often the case if gas lines are hard to install or if you want to reduce combustion systems. However, you absolutely must first check if you have enough electrical capacity and if it can connect to your existing plumbing. Since changing electrical setups is a major safety issue, talk to a professional installer to have them check your specific site conditions.

4. Deciding When to Replace Your Boiler and What the Installation Order Should Be

Instead of rushing to replace your boiler only after it breaks down, it’s usually better to plan ahead when your heating performance starts to noticeably drop. If you decide to move forward with a replacement, following these steps will make the process smoother.

  1. Check the maintenance history and overall heating efficiency of your current system.
  2. Decide on your type of underfloor heating and determine whether you’ll reuse the existing pipes or install new ones.
  3. Get quotes from several different companies after they assess your site conditions, and then compare the details.
  4. Plan your project timeline to align with your construction schedule and when you'll need heat for the winter.

The total cost of the job can vary wildly based on the size of your home, the condition of your piping, your floor coverings, and whether the old equipment needs to be removed. Don't just look at the final price; make sure you understand exactly what work is included in that quote.

Frequently Asked Questions About Underfloor Heating

Do I have to rip up my floor to install underfloor heating?

It depends on the method you choose. With water pipe systems, you often have to break up the floor. But for options like electric film or radiant heated flooring with laminate, there are installation methods where you can lay it over your existing floor. You should check the thickness and available height of your current floor first.

How is the price of a dry boiler determined?

It depends on the capacity, the installation requirements, the scope of the electrical work, and whether the old equipment needs to be removed. Even if you buy the same model, the total cost will change depending on the installation environment, so comparing the specific items listed on the quote is the most accurate way to go.

Will underfloor heating cost a lot in electricity bills?

This varies greatly depending on how you use it and how well-insulated your home is. You can lower your energy costs by keeping the thermostat at an appropriate temperature in a well-insulated house. It’s key to understand the characteristics of each heating method and adjust your usage pattern accordingly.

Take a look at the current condition of your floors and heating system, and jot down the requirements for each type of underfloor heating. When you take those notes to consult with an installer, you’ll be able to avoid unnecessary construction and prepare for winter much more easily.