Gas Boiler Replacement: Cost & Time Guide
Replacing a city gas boiler usually takes about three to four hours—it involves removing the old unit and securing the new one. In this post, we're going to cover the common cost calculation methods and what you need to check before and after the installation.
What to Check on Site: Boiler Lifespan and When to Replace It
On average, boilers start losing heating efficiency and parts begin to wear out after 8 to 10 years of use. If you're constantly having hot water cut out or seeing recurring error codes, those could be signs of corrosion in the internal heat exchanger or a failure in the circuit board. If the repair costs more than half the price of a new unit, it's probably smarter to replace it entirely rather than just making temporary fixes.
Especially during peak winter months, scheduling can get backed up, meaning you might go without heat for several days. So, it’s best to get an inspection done in the fall or before you move to make sure everything is in good shape. Since manufacturers usually guarantee parts for about 8 years after they stop production, you should plan ahead if your model is getting old.
What to Consider When Choosing an Eco-Friendly Model
Under the Air Quality Management Act, it's mandatory to install eco-friendly equipment that meets emission standards in most residential areas. However, if your building structure makes it difficult to connect the condensate drain, you might be able to qualify for an exception after getting approval from your local government. High-efficiency models, like the Condensing Boiler from Kyungdong Navien, are great for saving on gas bills, but you first need to check on available subsidies and where the drain can actually go.
- Confirm that a drain is within 3 meters of where the unit will be installed.
- Pre-check if it's possible to drill through a window frame on the balcony for the piping.
- Check with the building management office about the paperwork needed for the 1st-grade subsidy.
Standard Step-by-Step Process for City Gas Boiler Replacement
To ensure a safe installation, the work must be done precisely following a set procedure. Since extra materials might be needed depending on your specific site, it’s wise to compare detailed breakdowns during the quoting stage.
- Shut off the existing gas line and safely remove the main unit and flue.
- Use a spirit level to firmly secure the new mounting bracket to the wall.
- Place the main unit, then seal the connection point of the flue with heat-resistant silicone, next to a carbon monoxide detector.
- Turn on the gas valve and apply a gas leak detection solution to check for any leaks.
Choosing the Right Capacity and Comparing Models
If you install a unit with too small a capacity for your home's size, your heating efficiency will suffer, meaning you'll end up paying more in gas bills. On the flip side, choosing a unit that's too big means wasting money on unnecessary upfront investment. You need to select a specification that matches your actual living space.
| Category | Under 20 Pyeong | Dedicated to 30 Pyeong | 40 Pyeong and Up | Specification Details |
|---|---|---|---|---|
| Capacity | 14,000 Calories | 20,000 Calories | 30,000 Calories or More | Classification by Heating Area |
| Average Cost | Around 800,000 KRW | Around 1,000,000 KRW | 1,300,000 KRW or More | Includes Installation Costs |
| Time Required | 3 Hours | 3.5 Hours | 4 Hours or More | Varies Based on Site Conditions |
Frequently Asked Questions About Replacing Your Gas Boiler
Roughly How Much Does Replacing a Gas Boiler Cost?
The cost varies depending on the unit's capacity, the brand, and whether the flue needs replacement, but it generally falls between 800,000 KRW and 1,400,000 KRW. Keep in mind that extra material costs might pop up depending on the actual site conditions.
Is It Legal to Install It Yourself?
Under gas safety regulations, the replacement of a gas boiler must be done by a registered, professional contractor. If you try to install it yourself, you won't be covered by insurance in case of a gas leak, and you could face fines.
Why Are There Price Differences Between Condensing Boilers?
The price of a unit changes based on its maximum heat output, how it controls hot water, and whether it has smart features. While energy efficiency rating 1 products might have a higher initial price tag, they can save you money on fuel costs in the long run.
After the job is done, it's crucial to personally check that your carbon monoxide detector is working correctly and to keep the completion certificate for your safety.
