loading

If you smell gas, shut off the main valve and call us from outside.View Safety Rules

Gas Boiler Replacement Costs & Sizing Guide

When it comes to replacing your gas boiler, you're usually looking at it because it's hit about 10 years, or maybe it's just breaking down too often. For a typical replacement, you can expect costs between $800 and $1,200 for a home around 100 square feet (30 pyeong). In this guide, we're breaking down the real costs, the installation process, and what you need to watch out for when picking the right size.

How to Choose the Right Boiler Size for Your Home

The very first thing you need to nail down when swapping out your boiler is picking a calorie capacity that matches your heating square footage. If you go with a unit that's too small for your house, your heating won't be effective, and you'll just end up wasting money on gas. On the flip side, picking something way too big means unnecessary upfront costs. For most standard homes, you should aim for a guideline of about 400 to 500 kcal per square foot.

Smaller homes, under 24 pyeong, usually run best on models in the 14,000 to 16,000 calorie range. For apartments around 30 pyeong, a 20,000 calorie model is standard. If you have a home larger than 40 pyeong, you'll want to look at 25,000 to 30,000 calorie units. However, if you live in a detached house or a townhome (villa), your insulation might be less robust than in an apartment, so it’s safer to bump up to the next size up from the standard recommendation. Also, if you have two bathrooms, you need to factor in hot water usage, so definitely chat with a pro to make sure you don't run into hot water shortages.

What's Really in the Cost of Replacing a Gas Boiler?

Don't just look at the sticker price of the unit when getting quotes, or you might get hit with surprise fees later. You need to make sure the quoted service fee includes everything: the initial removal cost, the flue replacement, and all the labor for connecting the gas lines. There is a price difference between standard models and eco-friendly condensing models, and your final out-of-pocket cost can change depending on whether you qualify for government rebates.

ItemStandard BoilerEco-Friendly Condensing Boiler
Unit & Installation Cost$700,000 ~ $900,000$900,000 ~ $1,300,000
Government SubsidyNone$100,000 (Conditional)
Flue Installation FeeIncluded in Base PriceExtra if Drain Extension is Needed
Estimated Time Needed2 to 3 hours3 to 4 hours

Condensing models are required to have a drain nearby at the installation site. If your setup makes connecting the drain hose difficult, you need to check your installation environment beforehand. On top of that, if your manifold (distribution valve) is really old and needs replacing, or if you decide to have the pipes professionally cleaned, you might see extra charges ranging from $50,000 to $150,000.

Standard Installation Steps for Your New Boiler

For a safe heating system, the installation must follow a strict procedure. When a skilled technician arrives at your home, they'll first check the condition of your existing setup, shut off the gas valve, and then begin the removal process. From there, the rest of the installation proceeds systematically.

  1. Safely remove the old, worn-out boiler, along with its flue and surrounding piping.
  2. Securely mount the new unit to the wall, ensuring it is perfectly level using a spirit level.
  3. Install the carbon monoxide detector and the correctly sized exhaust/intake flue, sealing all joints with silicone.
  4. Connect the direct water, hot water, and heating supply/return pipes, ensuring there are no leaks, and wrap them with insulation.
  5. Perform a final check by running the system to confirm ignition, heating operation, and hot water output.

Once the installation is complete, you must verify that the carbon monoxide detector is working correctly, checking both its placement and battery status. Skipping this step could lead to fire or poisoning hazards, so it's wise to review the checklist with your technician.

What You Need to Know About Installing Eco-Friendly Boilers

In areas under air quality management regulations, installing eco-friendly condensing models is legally required. Failure to comply can result in fines. However, if your building's structure makes it physically impossible to install a condensing unit—for example, if the drain is too far away or there's a risk of freezing—you might qualify for an exception. To apply for these exceptions, you must submit a confirmation request to your local municipal government in advance.

If you receive an exception, you can install a standard model. But if you're looking at long-term heating cost savings from an energy efficiency standpoint, it's usually better to install a condensing unit, even if it means running longer pipes. Newer models, like the ones from Kyungdong Navien (Kyungdong Navien), boast high efficiency and feature low-NOx burners, which helps reduce air pollutants. Before you buy, it’s smart to check if the subsidy budget for your area has already been used up.

Common Boiler Problems and When to Replace Parts

Even if your boiler isn't completely dead, if you're seeing recurring error codes or hearing strange noises, it's a sign that internal parts are wearing out. One common issue is when you have no hot water or only lukewarm water; this is often due to a faulty flow sensor or a three-way valve. While a simple check or adjustment might fix it, if you need to replace a sensor or valve, or if there's a leak that needs fixing, you'll face extra costs.

If you keep having ignition failures or hear a popping sound inside, you should suspect your igniter plug or the gas valve is old. Before calling the manufacturer's A/S center, jot down the model name and error code printed on your unit—this will save you a ton of time on the phone. If your unit is over eight years old and past its parts warranty, repair costs might be excessive, so you need to decide if it's more economical to repair it or just replace the gas boiler entirely.

Frequently Asked Questions About Replacing a Gas Boiler

Do I need a separate city gas inspection when replacing the boiler?

After the installation is complete, you absolutely must have an inspection and safety check performed by a certified city gas contractor to get your gas supply and usage approved. If you tamper with the piping or skip the inspection, you won't have legal protection in case of a gas leak accident.

Can I install it myself or use a used boiler?

Under gas safety laws, it is illegal for anyone without a license to perform the installation. Replacing a gas boiler must be done by a qualified contractor with the proper registration. We don't recommend used units either, as they pose a greater fire risk due to safety verification issues and worn-out parts.

Will the cost be higher if I replace it during the winter peak season?

The standard equipment price and basic labor charges don't change much based on the season. However, during the peak cold weather, wait times for appointments get long, and you might be hit with emergency call-out fees or special same-day service charges. It's usually best to wait until the fall or off-season to get your boiler checked out and replaced.

To keep your heating system safe and running well for a long time, it's important to make a habit of regularly checking the piping for leaks and ensuring the flue is properly connected after installation.